Fume Hoods

Our Fume hoods are designed and continuously improved over the years to make sure your application is safe for the user. We comply with our standards to ANSI/ASHRAE 110 and EN 14175 standards.

December 1, 2020
0

Independent Hoods

Independent Hood is usually used for special equipment such as, AAS (ATOMIC ABSORPTION SPECTROPHOTOMETER), Autoclave, or others. This hood is static and differ from Flexible Extractor. We provide Independent Hood made from PVC or Stainless Steel.

November 13, 2020
0

Flexible Extractor

Flexible Extractor Is used to extract hazardous particles and gases. Flexible Extractor has 360° degree rotational swivel mounted in place to facilitate your work. There are 4 types available, namely: Standard Version; suitable for evacuation of most types of airborne contaminants, PP Version, most suitable for evacuation of highly corrosive contaminants in high concentrations, ESD Version, for ESD environment, type approved to EN 100015-1, ATEX Version,  for ATEX classed environment, as in directive 94/9/EC category 2, for gases and dust. All types are suitable for table mounting, ceiling mounting and wall mounting.

November 13, 2020
0

Double Side Fume Hood

Double sided fume hoods are designed to provide the greatest visibility, allowing an instructor or supervisor to spot any hazardous situations that may occur. Our commitment to quality through our ISO Quality Management System assures the reliable, long life of our laboratory furniture. Version available for either Constant Air Volume (CAV) or Variable Air Volume (VAV) applications.

November 13, 2020
0

Ductless Fume Hood

Safer to operate: Exclusive Erlab filtration technology combining activated carbon and HEPA/ULPA to adapt to the manipulation, Meets AFNOR NFX 15 211/ANSI Z9.5-2012 filtration efficiency standard (class 1 and 2), Real time sensors to detect main filter saturation with solvents, acids or formaldehyde, Safety filter in case of main filter saturation, Air face velocity permanent monitoring, Erlab Safety Program: application analysis and validation, usage framework certification, usage follow-up, Connected device allowing reception of safety notifications and use status

November 13, 2020
0

Passbox

Our Passbox is designed to be used in the Cleanroom and BSL class Laboratory, you can equip this Pass Box with Alarm or UV light (optional) and it has an interlock mechanism hence there won’t be any contamination between each room.

November 13, 2020
0

Acid/Corrosive Storage

Acid/Corrosive Storage Cabinets is used to store hazardous substances and corrosive type chemicals. Material used is PP (polypropylene)

November 13, 2020
0

Flammable Storage

Flammable Storage Cabinets provides a safe storage solution for flammable acids, allowing personnel time to escape in emergencies. All our safety cabinets are manufactured as per US National Fire Protection Agency Standard (NFPA) Code 30 and have been type tested by external laboratories. We  provide various types and sizes 15, 30, 45, 60 and 90 gallon. All Flammable Storage Cabinets are equipped with exhaust motor and ducting line system.

November 13, 2020
0

Emergency Eye Wash

We provide various types of emergency eye wash to prevent accidents in the eye. Emergency eye wash can be mounted on the wall (wall mounting), above table, ceiling, stand alone, or next to the sink. Each Emergency eye wash also comply with European Standard EN 15154

November 13, 2020
0

Emergency Shower

Emergency Showers is one of main requirement in the laboratory. Thousands of industrial accidents happen every year in spite of precautionary safety measures, accidents that are caused by human exposure to heat (fire, boiling water and oil, steam, etc), to corrosive agents (fluid acids and caustics) and/or to influence by dust and corrosive aerosols (metal, dirt, fluids).

November 13, 2020
0